LRS-35 series is a 35W single-output enclosed type power supply with 30mm of low profile design. Adoptingthe full range 85~264VAC input, the entire series provides an output voltage line of 5V, 12V, 15V,24V36V and 48V.
русский
español
العربية
(Support door to door service)Order(MOQ):
1Product Origin:
ChinaShipping Port:
QingdaoLaser power:
35W35w Single Output Switching Power Supply
In addition to the high efficiency up to 89%, the design of metallic mesh case enhances the heat dissipationof LRS-35 that the whole series operates from -30'℃ through 70'℃ under air convection without a fan.Delivering an extremely low no load power consumption (less than 0.2W), it allows the end system toeasily meet the worldwide energy requirement. LRS-35 has the complete protection functions and 5G antivibration capability; it is complied with the international safety regulations such as TUV BS EN/EN62368-1BS EN/EN60335-1.BSEN/EN61558-1/-2-16,UL62368-1 and GB 4943.1. LRS-35 series serves as a highprice-to-performance power supply solution for various industrial applications.
Applications
• Industrial automation machinery
• Industrial control system
• Mechanical and electrical equipment
• Electronic instruments, equipments orapparatus
• Household appliances
Product Parameters
| MODEL | LRS-35-5 | LRS-35-12 | LRS-35-15 |
LRS-35-24 |
LRS-35-36 |
LRS-35-48 |
| DC VOLTAGE | 5V | 12V | 15V |
24V |
36V |
48V |
| RATED CURRENT | 7A | 3A | 2.4A |
1.5A |
1A |
0.8A |
| CURRENT RANGE | 0~7A | 0~3A | 0~2.4A |
0~1.5A |
0~1A |
0~8A |
| RATED POWER | 35W | 36W |
38.4W | |||
| RIPPLE & NOISE(max.) Note.2 | 80mVp-p |
120mVp-p |
150mVp-p |
200mVp-p |
||
| VOLTAGE TOLERANCE | 4.5~5.5V | 10.2~13.8V | 13.5~18V |
21.6~28.8V |
32.4~39.6V |
43.2 ~ 52.8V |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ||||
| LINE REGULATION Note.4 | ±0.5% | |||||
| LOAD REGULATION Note.5 | ±1.0% | ±0.5% | ||||
| SETUP, RISE TIME | 1000ms, 30ms/230VAC 2000ms,30ms/115VAC at full load | |||||
| HOLD UP TIME (Typ.) | 30ms/230VAC 12ms/115VAC at full load | |||||
| VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 373VDC | |||||
| FREQUENCY RANGE | 47~63Hz | |||||
| EFFICIENCY (Typ.) | 82% | 86% |
88% |
89% | ||
| AC CURRENT (Typ.) | 0.7A/115VAC 0.42A/230VAC | |||||
| INRUSH CURRENT(Typ.) | COLD START 45A/230VAC | |||||
| LEAKAGE CURRENT | <0.75mA / 240VAC | |||||
| OVER LOAD |
110 ~ 150% rated output power |
|||||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed |
||||||
| OVER VOLTAGE |
5.75 ~ 6.9V |
13.8 ~ 16.2V |
18.75 ~ 21.75V |
28.8 ~ 33.6V |
41.4 ~ 48.6V |
55.2 ~ 64.8V |
| Protection type : Shut down o/p voltage, re-power on to recover |
||||||
| WORKING TEMP. |
-30 ~ +70℃ (Refer to "Derating Curve") |
|||||
| WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
|||||
| STORAGE TEMP., HUMIDITY |
-40 ~ +85℃, 10 ~ 95% RH non-condensing |
|||||
| TEMP. COEFFICIENT |
±0.03%/℃ (0 ~ 50℃) |
|||||
| VIBRATION |
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
|||||
| OVER VOLTAGE CATEGORY |
Ⅲ; According to BS EN/EN61558, BS EN/EN50178, BS EN/EN60664-1, BS EN/EN62477-1; altitude up to 2000 meters |
|||||
| SAFETY STANDARDS |
UL62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, BS EN/EN61558-1/-2-16,GB 4943.1, BSMI CNS15598-1, EAC TP TC 004,AS/NZS 60950.1(by CB),KC K60950-1(for LRS-35-12/24 only), BIS IS13252(Part1): 2010/IEC 60950-1: 2005(NOTE 10) approved |
|||||
| WITHSTAND VOLTAGE |
I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC |
|||||
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
|||||
| EMC EMISSION |
Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN55014, BS EN/EN61000-3-2,-3, GB17625.1,GB/T 9254.1, BSMI CNS15936, EAC TP TC 020,KC KN32,KN35(for LRS-35-12/24 only) |
|||||
| EMC IMMUNITY |
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN55035, heavy industry level, EAC TP TC 020,KC KN32,KN35(for LRS-35-12/24 only) |
|||||
| MTBF |
3201.5K hrs min. Telcordia SR-332 (Bellcore) ; 655.5Khrs min. MIL-HDBK-217F (25℃) |
|||||
| DIMENSION |
99*82*30mm (L*W*H) |
|||||
| PACKING |
0.23Kg ; 60pcs/14.8Kg/0.88CUFT |
|||||
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. 7. 5V when the load factor 0~50%, the switching power less is reduced by burst operation, which will cause ripple and ripple noise to go beyond the specifications. 8. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft). 9. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” 10. Some model may not have the BIS logo, please contact your MEAN WELL sales for more information. |
||||||
Features
• Universal AC input/Full range
• Withstand 300VAC surge input for 5 second
• No load power consumption<0.2W
• Miniature size and 1U low profile
• High operating temperature up to 70℃
• Protections: Short circuit /Overload /Over voltage
• Cooling by free air convection
• Compliance tolEC/BS EN/EN 60335-1(PD3) and IEC/BS EN/EN61558-1,-2-16 for household appliances
• Operating altitude up to 5000 meters (Note.8)
• Withstand 5G vibration test
• High efficiency, long life and high reliability
• LED indicator for power on
• Over voltage category Il!
• 100% full load burn-in test
Block Diagram
Derating Curve Static Characteristics
Mechanical Specification
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved.
Sitemap | Blog | Xml | Privacy Policy 
