Ruida Controller System Laser Cnc Machine RDC5121G Special Laser Cutting and Engraving Card

RDC5121G Special Laser Cutting and Engraving Card

The Ruida RDC5121 Lite Version is a digital signal processor (DSP) controller for a CO2 laser engraving and cutting machine. It is used to control the laser’s power and speed, as well as other parameters, to ensure precise and accurate laser engraving and cutting. The “Lite Version” designation likely means that it has fewer features compared to the full version of the Ruida RD RDC5121 controller.

Technical Parameters

• 2 motor interface output maximum 400KHZ frequency, drive capacity 20mA; 

• 1 channel laser interface output maximum 200KHZ frequency, duty cycle 1% ~ 99% adjustable, drive capacity 50mA; 

• Onboard 128M non-releasable memory; 

• USB maximum transmission rate 12M, the longest distance of 5 meters; 

• Linear / arc / B-spline interpolation accuracy +/- 0.5 pulse; 

• 2 universal optical isolation OC gate output, maximum 300mA drive capability (with freewheeling protection); 

• 2 universal optical isolation inputs, compatible with 5V/12V/24V logic level;

Size

Diagram

Software

Parameter

• Support LCD display and button operation

• Support up to 2 motor outputs, 1 channel independent digital analog laser output;

• Support up to 2 OC gates (300ma current output, can directly drive/24 relay

• Support laser engraving/cutting

• 2 motor interface output maximum 400KHZ frequency, drive capacity 20 ma

• Onboard 128M non-releasable memory

• USB maximum transmission rate of 12M, the longest distance of 5 meters

• Linear arc/b-spline interpolation accuracy +/-0.5 pulse;

• 2 universal optical isolation inputs compatible with 5V/2V/24V logic level

Application

It can be widely used in laser cutting, laser engraving, laser welding, and other fields with only XY two motion axes, one laser channel, and a small number of input and output points.