UHP-750 seriesis a750W single-output slim type power supply with 41mm oflow profile design.Adoptina the full range 90~264VAC input, the entire series provides an output voltage line of 12V, 24V.36vand 48V. in addition to the high efficiency up to 95%, that the whole series operates from -30'c ~ 70'c underair convection without fan. UHP-750 has the complete protection functions and 5G anti-vibratiorcapability; lt is complied with the international safety regulations such as TUV BS EN/EN62368-1 andUL62368-1. UHP-750 series serves as a high performance power supply solution for various industrialapplications.
(Support door to door service)
Order(MOQ):
1Product Origin:
ChinaShipping Port:
QingdaoLaser power:
750W750W Slim Type with PFC Switching Power Supply
UHP-750 seriesis a750W single-output slim type power supply with 41mm oflow profile design.Adoptina the full range 90~264VAC input, the entire series provides an output voltage line of 12V, 24V.36vand 48V. in addition to the high efficiency up to 95%, that the whole series operates from -30'c ~ 70'c underair convection without fan. UHP-750 has the complete protection functions and 5G anti-vibratiorcapability; lt is complied with the international safety regulations such as TUV BS EN/EN62368-1 andUL62368-1. UHP-750 series serves as a high performance power supply solution for various industrialapplications.
Applications
• Industrial automation machinery
• Industrial control system
• Mechanical and electrical equipment
• Electronic instruments, equipments orapparatus
• Household appliances
• Power Sourcing Equipment of PoE(48V model: DC O/P range 48~57.6V)
Model Encoding
Product Parameters
MODEL | UHP-500-12 |
UHP-500-24 |
UHP-500-36 |
UHP-500-48 |
DC VOLTAGE | 12V | 24V | 36V | 48V |
RATED CURRENT | 60A | 31.3A | 20.9A | 15.8A |
RATED POWER | 720W |
751.2W |
752.4W |
753.6W |
RIPPLE & NOISE(max.) Note.2 | 150mVp-p |
200mVp-p |
250mVp-p |
|
VOLTAGE ADJ. RANGE | 12~14.4V |
24~28.8V |
36~43.2V |
48~57.6V |
VOLTAGE TOLERANCE Note.3 | ±1.0% |
|||
LINE REGULATION | ±0.5% |
|||
LOAD REGULATION | ±0.5% |
|||
SETUP, RISE TIME | 1000ms, 50ms/230VAC 1000ms,50ms/115VAC at full load |
|||
HOLD UP TIME (Typ.) | 12ms/230VAC 12ms/115VAC |
|||
VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC |
|||
FREQUENCY RANGE | 47 ~ 63Hz |
|||
POWER FACTOR (Typ.) | PF≥0.95/230VAC PF≥0.98/115VAC at full load |
|||
EFFICIENCY (Typ.) | 93.5% |
95% |
||
AC CURRENT (Typ.) | 7.5A/115VAC 3.8A/230VAC |
|||
INRUSH CURRENT(Typ.) | Cold start 20A/115VAC 40A/230VAC |
|||
LEAKAGE CURRENT | <0.75mA / 240VAC |
|||
OVERLOAD |
105~125% rated output power |
|||
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||
OVER VOLTAGE |
14.5 ~ 16V |
29 ~ 33V |
43.5 ~ 49V |
59 ~ 66V |
Protection type: Shut down O/P voltage, re-power on to recover |
||||
OVER TEMPERATURE |
Protection type: Shut down O/P voltage, recovers automatically after temperature goes down |
|||
DC OK SIGNAL(Optional) |
Contact rating(max.): 30Vdc/1A resistive load |
|||
WORKING TEMP. |
-30 ~ +70℃(Refer to “Derating Curve") |
|||
WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
|||
STORAGE TEMP., HUMIDITY |
-40 ~ +85℃, 10 ~ 95% RH non-condensing |
|||
TEMP. COEFFICIENT |
±0.03%/℃ (0 ~ 50℃) |
|||
VIBRATION |
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
|||
SAFETY STANDARDS |
UL62368-1,TUV BS EN/EN62368-1, EAC TP TC 004 approved |
|||
WITHSTAND VOLTAGE |
I/P-O/P: 3.75KVAC I/P-FG: 2KVAC O/P-FG: 1.25KVAC |
|||
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/ 70%RH |
|||
EMC EMISSION |
Parameter |
Standard |
Test Level / Note |
|
Conducted |
BS EN/EN55032 (CISPR32) |
Class B |
||
Radiated |
BS EN/EN55032 (CISPR32) |
Class B |
||
Harmonic Current |
BS EN/EN61000-3-2 |
Class A |
||
Voltage Flicker |
BS EN/EN61000-3-3 |
----- |
||
EMC IMMUNITY |
BS EN/EN55035, BS EN/EN61000-6-2 |
|||
Parameter |
Standard |
Test Level / Note |
||
ESD |
BS EN/EN61000-4-2 |
Level 3, 8KV air ; Level 2, 4KV contact |
||
Radiated |
BS EN/EN61000-4-3 |
Level 3 |
||
EFT / Burst |
BS EN/EN61000-4-4 |
Level 3 |
||
Surge |
BS EN/EN61000-6-2 |
2KV/Line-Line 4KV/Line-Earth |
||
Conducted |
BS EN/EN61000-4-6 |
Level 3 |
||
Magnetic Field |
BS EN/EN61000-4-8 |
Level 4 |
||
Voltage Dips and Interruptions |
BS EN/EN61000-4-11 |
>95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods |
||
MTBF |
833.9K hrs min. Telcordia SR-332 (Bellcore); 104.9K hrs min. MIL-HDBK-217F (25℃) |
|||
DIMENSION |
237*100*41mm (L*W*H) |
|||
PACKING |
1.4kg; 10pcs/15kg/0.8CUFT |
|||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance :includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. The power supply is considered a component which wil be instaed into a inal equipment. All the EMC tests are been executed by mouning the unit ona 360mm*360mm metal plate wih imm of thickness. The final equipment must be re-conrmed that it stll meets EMC directives. For guidance on how toperfomm these EMC tests, please refer to “EMl testing of component power supplies. 6. The ambient temperature derating of 3.5'c/1000m with fanless models and of 5'c/1000m with fan models for operating alitude higher than 2000m(6500ft). |
Features
• Slim and Low profile (41mm)
• Fanless and conduction-cooled design
• Withstand 300VAC surge input for 5 seconds
• Built-in active PFC function
• -30~+70℃ working temperature
• Protections: Short circuit / Overload / Over voltage /Over temperature
• DC OK active signal and redundant function(option)
• Operating altitude up to 5000 meter (Note.5)
• LED indicator for power on
Block Diagram
STATIC CHARACTERISTIC EFFICIENCY VS LOAD (48V MODEL)
DERATING CURVE
DC OK Relay Contact
Mechanical Specification
Installation
1.Operate with additional aluminum plate and fan
In order to meetthe"Deraling Curve"and he "Stalic characteristics".UHp.750 series can be installed onto an aluminum platelorthe cabinetofthe same sizeon the botom or applyforced air cooled solution. The size of the suggested aluminum plate and configuration of fan are shown as below. And foroptimizingthermalperformance,the aluminum plate musthave an even and smooth surface (or cated with thermal grease), and UHP-750 series must be firmly mountedat the centerofthe aluminum plate,
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy