Fiber Laser source

JPT LP series is a fiber laser using direct electrical modulation semiconductor laser as source (MOPA), which has high-quality laser characteristics and good pulse control waveform capability. Compared with Q-switched fiber lasers, LP  series lasers have greater flexibility, can achieve a wider range of frequency  adjustment, higher control accuracy, and better first pulse performance. (Support door to door service)

JPT M7 series high power pulsed fiber lasers make use of master oscillator power amplifier (MOPA) configuration, and show excellent laser performance as well as high level of temporal pulse shaping controllability. As compared to theQ-switching technology, the pulse repetition frequency (PRF) and pulse width can be controlled  independently in MOPA configuration, through adjusting different combination of the above parameters, the peak power of laser can be well maintained. And enable JPT  laser suitable for more material processing which Q-switch limited. The higher  output power makes its advantages especially in high speed marking applications. (Support door to door service)

Q-switch series pulsed fiber laser is designed based on Q-switch oscillator and MOPA,offer a varietymodels from 30X to 50X. The laser is transmitted by fiber and isolator,and is controlled through a 25-pin interface. The Q-switched pulse fiber laser issuitable for intergration, and could meet the requirements of plastic marking, metal marking, engraving, coating removal,fine cutting, drilling, etc. (Support door to door service)

Q-switch series pulsed fiber laser is designed based on Q-switch oscillator and MOPA, offer a variety models from 30X to 50X. The laser is transmitted by fiber and isolator, and is controlled through a 25-pin interface. The Q-switched pulse fiber laser is suitable for intergration, and could meet the requirements of plastic marking, metal  marking, engraving, coating removal,fine cutting, drilling, etc. (Support door to door service)

Q-switch series pulsed fiber laser is designed based on Q-switch oscillator and MOPA. The laser is transmitted by fiber and isolator, and is controlled through a 25-pin interface. The Q-switched pulse fiber laser is suitable for intergration, and could meet the requirements of plastic marking, metal marking, engraving, coating removal,fine cutting, drilling, etc. (Support door to door service)

300W Single Module CW Fiber Laser based on modular design, has excellent beam quality and high stability, which structure is compact and air cooling.The laser can be adjusted continuously,and the beam is transmitted by fiber and QBH connector. The laser is very suitable for system intergration with robot or machine tool, and is widely used for laser cutting, welding, 3D printingon electronics, automobile parts, etc. (Support door to door service)

The MFSC 500W series lasers are water-cooled and maintenance-free and with a wall plug efficiencyof more than 25% and deliver high efficiency, high reliability and high performance,which can be used for cutting, welding and drilling of metal materials such as stainless steel, carbon steel, aluminum and copper. It is widely used in sheet metal cutting, metal processing, home appliance manufacturing, automobile manufacturing and other fields. (Support door to door service)

The new generation of Single Module 2000W-3000W Fiber Lasers which combined with  high power, compact size, superior beam quality, and high light conversion efficiency. It can meet the requirements of precision processing, 3C product welding and  high-reflective material cutting ability are significantly improved. It is suitable for remote processing, high-frequency laser cutting and clean surface cutting. It can  be quickly and conveniently integrated into machine tool equipment and large-scale  factory. automation production line. (Support door to door service)