Q-switch series pulsed fiber laser is designed based on Q-switch oscillator and MOPA,offer a variety
models from 30X to 50X. The laser is transmitted by fiber and isolator,and is controlled through a
25-pin interface. The Q-switched pulse fiber laser issuitable for intergration, and could meet the
requirements of plastic marking, metal marking, engraving, coating removal,fine cutting, drilling,
etc.
(Support door to door service)
Product Origin:
ChinaLead Time:
10DaysShipping Port:
QingdaoLaser power:
30w 50wLaser source:
MAXSize:
345.5×266.2×120 mmMAX MFPT 20W 50W 70W MOPA Pulsed Fiber Laser Source
Adjustable pulse width pulse fiber laser adopts MOPA structure two-stage amplification, pulse width and frequency are independently adjustable, making more laser applications possible. The pulse width is flexibly adjustable between 2-350ns, the peak power is up to 10kW, and the repetition frequency is up to 2000kHz. It is equipped with an independent research and development on-line isolator. It is an ideal laser source for laser fine processing. It is widely used in alumina blackening, stainless steel stable color printing, and high-speed plastics. Marking, chip marking, fine etching, laser deep engraving and other fields.
Feature
1. The pulse width and frequency are independently adjustable, the pulse frequency range is wide, and the beam quality is good;
2. Easy to integrate, convenient to operate, and can be directly integrated into user equipment;
3. Convenient operation, built-in red light, precise indication;
4. Maintenance-free, all-optical fiber, no optical components, integrated optical path, long-term stability;
5. Wide range of applications: widely used in alumina blackening, stainless steel stable coloring, plastic high-speed marking, chip marking, fine etching, laser deep carving and other fields;
Specifications
Model | 20W | 30W |
50W |
70W |
Model | Pulse |
|||
Polaricalion | Random |
|||
Beam Quality | 1.2 1.45㎡ |
1 .4-1.8㎡ |
||
Center wavelength | 1064mn |
|||
Speclrur widlh (3d) |
8-15 |
|||
Average Optical Power (Pnom) | 20.5W |
20.5W |
30W |
|
Power Adjustment Range | 10-100% |
|||
Single Puke Eneryy | 0.6MJ |
0.8MJ |
1MJ |
1.33MJ |
Optical Pulse width (FWHN) | 85( 350ns/50KHz ) |
|||
Pulse Repetition Frequency |
1-2000 (pulse width 2-40ns) | |||
1-1000 (pulse width 50-80ns) | ||||
1-400 (puise width 100-200ns) | ||||
1-200 (pulse width 220-350ns) | ||||
Full power repetition frequency (KHz) |
30/50/52-2000 |
|||
0utput Beam Diameter |
7(6-9)(1/e2 ) |
|||
Output beam Fllipticity |
90% |
|||
Delivery Cable Lenggth |
2.5(1.9-3)M |
|||
Workiny lemperalure |
0-40℃ |
|||
Cooling Methed |
Air Cooled |
|||
Operating Voltage |
24VDC |
|||
Working Curent |
15A |
|||
Densions |
355x266x120mm |
Dimension
Unit: mm
• Laser Appearance Dimensions
• Standard isolated output head dimensions
Product Connection
Pin# | Description |
1-8( DO-D7) |
1. Power setting (16-bit bus. 0-FFh in hexadecimal or 0-255 in decimal formats. 2.Least significant bit (lsb) (D0) corresponds to Pin number 1, Most significant bit (msb) (D7)corresponds to pin 8. |
-00h(0): Minimum output power |
|
-FFh(255): Maximum output power |
|
-Disconnected corresponds to 00h. 2. PWM (pulse-width modulation)Communication interface Control Bus is DB25.22,Refer to -5.5 Pulse duration Set D1 : Data Bus D2 : Timing Bus Other reserves |
|
9 |
Latch(Latches power setting into the laser by the rising edge) |
14,15 | Ground |
24,25 | Floating |
11,12 ,16 ,21 | Laser alarms (see alarm codes in the table below). |
17 | +5+0.25VDC power supply input for pin |
16,21 | Laser alarms status (see alarm codes in the table below). |
18 |
Master Oscillator(MO)signal |
HIGH: MO on LOW | |
LOW or disconnected: MO off | |
19 |
Booster signal (ON/OFF input) |
HIGH: Booster on |
|
LOW or disconnected:Booster off |
|
20 | Pulse Repetition Rate (Synchronization) input |
22 | Guide Laser(red diode) ON/OFF input |
HIGH: Red diode ON LOW or disconnected: Red diode OFF 2.PWM (pulse-width modulation) Communication Interface, Control Bus, data timing bus refer to -5.5 Pulse duration Set. High: OFF Low: ON/Connect |
|
23 |
Emergency Stop Input High: OK(Normal operation) LOW or disconnected: STOP |
Product Details
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy