Yongli beam concentration 100w glass co2 laser tube

Yongli beam concentration 100w glass co2 laser tube

High-Quality Optics: The co2 laser tubes are equipped with top-quality, American II-VI lenses to achieve strong and stable output power and good laser beam mode. Imported tube glass material ensures a Stable cavity structure.

High quality laser beam and high power output; Double laser cutting speed, service life is about 8000-12000 hours longer than ordinary laser tube. We have 10 months warranty for YongLi H Series co2 laser tube.

High Efficient Nano Catalyst Coated laser tube: Improves the speed and quality of laser beam,and last-longer than ordinary CO2 laser tube.

Product Parameters

Installation Instructions:

1. High voltage sheath: Seal the High pressure sheath with plastic wrap to prevent dust from entering and causing wet ignition. 

2. Positive Electrode Terminal：Full Metal head structure, Special heat dissipation process to greatly reduce lens operating temperature. Adapting new unique screws wiring method, easy to connect and disassemble . 

3. Water Inlet/Outlet:During installation,the water outlet mouth must upward, and always make sure that the water circulation is Low IN High OUT. 

4. Negative Electrode Terminal: equipped with high quality, American II-VI lens to achieve strong and stable output power and best lase beam mode. 

5. Extended Protection Metal Tube for Output Lens Protection: The extended protection tube is recommended when Multi-layer plywood, PVC materials are to be cut. The extended protection tube should be installed to avoid laser lens damage or laser power reduction caused by dust contaminating and co2 laser tube heads temperature increasing.