Professional 80W Co2 Laser Power Supply HY-DY10 Manufacturer In China,80W Co2 Laser Power Supply HY-DY10 Suppliers

100W CO2 Laser Power Supply HY-TA100 With LED

Laser engraving machine, laser cutting machine, laser marking machine, leather cutting machine, garment cutting machine, shoe pattern cutting machine, advertising engraving machine, leather engraving machine, glass engraving machine, laser bag opening machine, laser drilling machine (Support door to door service)

DAVI 30W CO2 RF Laser Source

1. 3-5 years Long lifetime, Stable machine and mode quality 2. All metal body and very firm 3. Small size easy to carry 4. Quick response time nanosecond count 5. RF discharge, the top of machine covered with circuit (Support door to door service)

Meanwell 50W Single Output Switching Power Supply

LRS-50 series is a 50W single-output enclosed type power supply with 30mm of low profile design. Adoptingthe full range 85~264VAC input, the entire series provides an output voltage line of3.3v, 5V, 12V,15V24V.36V and 48V. (Support door to door service)

80W ZR Co2 Laser Power Supply

ZRSUNS 80 watts Laser Power Source adopt high frequency design advantages, pay more attention toevery component quality for major parts, and keep high performance and duration.80W laser power supplieswere used to 70W -80W CO2 laser tube for kinds of industrial laser system. Laser power supply producedby LinYiZhaoRiElectronics is well known with ultra long lifetime, stability, good compatibility, as first choicein 8ow cO2 laser cutter and laser engraver. (Support door to door service)

Meanwell 600W Single Output Switching Power Supply

LRS-600 series is a 600W single-output enclosed type power supply with 41mm of low profile design. Adoptingthe input of 1 15VAC or 230VAC (select by switch), the entire series provides an output voltage line of 5V12V, 15V, 24V, 27V, 36V and 48v.in addition to the high efficiency up to 92%, with the built-in long lifefan LRS-600 can work under -20~+65'℃ with full load. (Support door to door service)

3D fiber laser marking machine

3D dynamic focus laser marking Engraving machine adopt imported core components, with high-speed, high precision 3D galvo, and with our 3D specified software and control system, it can engrave on any curved workpieces in a fine process, there is no off-focus problem. (Support door to door service)

Leadshine 573S15-L 3-Phase Stepper Motor

● 3 phase 1.2° stepping angle ● Standard NEMA 23 dimensions ● Holding toque of 1.3 Nm (184 oz-in) ● High precision ● Smooth movement ● Low motor heating ● Low movement noise (Support door to door service)

JCZ Ezcad Control Card & BJJCZ Laser Controller Board Marking Software Ezcad3

Updated Version: significant acceleration of data processing and needs for advanced processing met; Combination of two-dimensional and three-dimensional functions; Support of large-format processing, high-performance motion control, and other functions; Ethernet Interface: no limitation of the transmission distance and remote control available; Support of various mainstream lasers. (Support door to door service)

Input voltage	110V or 220V(Default220v)
Ac frequency	47---440HZ
Power	80-100W
Max. Input Current	8A
Max. Output Voltage	DC 35KV
Max. Output Current	DC 23mA
Efhciency	>90%(full load)
MTBF	>10000hours
Response Speed	＜1ms
Environment	Temperature (-10~40)C
Cooling Form	Forced Air Cooling
Dimensions	198x163x85mm

LASER ACCESSORIES

80W Co2 Laser Power Supply HY-DY10

80W Co2 Laser Power Supply HY-DY10

Product Categories

Related Products