UHP-350 series is a 350W single-output slim type power supply with 31 mm of low profile design.Adopting the full range 90~264VAC input, the entire series provides an output voltage line of 3.3V4.2V, 5V, 12V, 15V, 24V, 36V,48V and 55v. In addition to the high efficiency up to 94%, that the wholeseries operatesfrom -30'c ~ 70'c under air convection without fan, UHP-350 has the completeprotection functions and 5G anti-vibration capability;lt is complied with the international safetyregulations such aS TUV BS EN/EN62368-1,BS EN/EN60335-1.UL62368-1 and GB 4943.1.UHP-350seriesserves as a high performance power supply solution for various industrial applications.
русский
español
العربية
(Support door to door service)Order(MOQ):
1Product Origin:
ChinaShipping Port:
Qingdao350W Slim Type with PFC Switching Power Supply
UHP-350 series is a 350W single-output slim type power supply with 31 mm of low profile design.Adopting the full range 90~264VAC input, the entire series provides an output voltage line of 3.3V4.2V, 5V, 12V, 15V, 24V, 36V,48V and 55v. In addition to the high efficiency up to 94%, that the wholeseries operatesfrom -30'c ~ 70'c under air convection without fan, UHP-350 has the completeprotection functions and 5G anti-vibration capability;lt is complied with the international safetyregulations such aS TUV BS EN/EN62368-1,BS EN/EN60335-1.UL62368-1 and GB 4943.1.UHP-350seriesserves as a high performance power supply solution for various industrial applications.
Applications
• Industrial automation machinery
• Industrial control system
• Mechanical and electrical equipment
• Electronic instruments, equipments orapparatus
• Household appliances
• LED display application
• Power Source Equipment for PoE(55V model)
Product Parameters
| MODEL | UHP-350-3.3 |
UHP-350-4.2 |
UHP-350-5 |
UHP-350-12 |
UHP-350-15 |
UHP-350-24 |
UHP-350-36 |
UHP-350-48 |
UHP-350-55 |
| DC VOLTAGE | 3.3V | 4.2V | 5V | 12V | 15V | 24V | 36V | 48V | 55V |
| RATED CURRENT | 60A |
29.2A | 23.4A | 14.6A | 9.75A | 7.3A | 6.3 | ||
| RATED POWER | 198W |
252W |
300W |
350.4W |
351W |
350.4W |
351W |
350.4W |
350W |
| RIPPLE & NOISE(max.) Note.2 | 150mVp-p |
200mVp-p |
240mVp-p |
300mVp-p |
|||||
| VOLTAGE ADJ. RANGE | 3.2~3.5V |
3.6~4.4V |
4.5~5.5V |
11.4~12.6V |
14.3~15.8V |
22.8~25.2V |
34.2~37.8V |
45.6~50.4V |
45~58V |
| VOLTAGE TOLERANCE Note.3 | ±2.0% |
±1.0% |
|||||||
| LINE REGULATION | ±0.5% |
±0.3% |
|||||||
| LOAD REGULATION | ±1.0% |
±0.5% |
|||||||
| SETUP, RISE TIME | 2000ms, 80ms/230VAC; 3000ms, 80ms/115VAC at full load;550ms/230VAC for 55V setup time |
||||||||
| HOLD UP TIME (Typ.) | 10ms/230VAC 10ms/115VAC |
||||||||
| VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC |
||||||||
| FREQUENCY RANGE | 47 ~ 63Hz |
||||||||
| POWER FACTOR (Typ.) | PF≥0.94/230VAC PF≥0.98/115VAC at full load |
||||||||
| EFFICIENCY (Typ.) | 88.5% |
89% |
90% |
91% |
92% |
94% |
|||
| AC CURRENT (Typ.) | 4A/115VAC 2A/230VAC |
||||||||
| INRUSH CURRENT(Typ.) | Cold start 30A/115VAC 60A/230VAC |
||||||||
| LEAKAGE CURRENT | <0.75mA / 240VAC |
||||||||
| OVERLOAD |
110~140% rated output power |
||||||||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed |
|||||||||
| OVER VOLTAGE |
3.8~ 4.6V |
4.62 ~ 5.46V |
5.75 ~ 6.75V |
13.2 ~ 15.6V |
16.5 ~ 19.5V |
26.4 ~ 31.2V |
39.6 ~46.8V |
52.8 ~ 62.4V |
60 ~ 69V |
| Protection type :Shut down O/P voltage,re-power on to recover |
|||||||||
| OVER TEMPERATURE |
Protection type :Shut down O/P voltage or Hiccup mode, recovers automatically after temperature goes down |
||||||||
| DC OK SIGNAL(Optional) |
Contact rating(max.):15Vdc/10mA resistive load |
||||||||
| REDUNDANT(Optional) |
For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be automatically enabled. This can prevent the system crash, and provide the reliability of system |
||||||||
| WORKING TEMP. |
-30 ~ +70℃(Refer to “Derating Curve") |
||||||||
| WORKING HUMIDITY |
20 ~ 95% RH non-condensing |
||||||||
| STORAGE TEMP., HUMIDITY |
-40 ~ +85℃, 10 ~ 95% RH non-condensing |
||||||||
| TEMP. COEFFICIENT |
±0.03%/℃ (0 ~ 50℃) |
||||||||
| VIBRATION |
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
||||||||
| SAFETY STANDARDS |
UL 62368-1,TUV BS EN/EN62368-1,BS EN/EN60335-1(Except for 55V), GB 4943.1, EAC TP TC 004, KC62368-1(only for UHP-200-24),BS EN/EN61558-1,BS EN/EN61558-2-16,BSMI CNS15598-1 approved |
||||||||
| WITHSTAND VOLTAGE |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC |
||||||||
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/ 70%RH |
||||||||
| EMC EMISSION |
Compliance to BS EN/EN55032,GB17625.1,GB/T 9254.1,Class B, BS EN/EN55014,BS EN/EN61000-3-2,-3, BSMI CNS15936, EAC TP TC 020 |
||||||||
| EMC IMMUNITY |
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11;BS EN/EN61000-6-2 (BS EN/EN50082-2),BS EN/EN55035, heavy industry level ,EAC TP TC 020 |
||||||||
| MTBF |
1791.2 K hrs min. Telcordia SR-332 (Bellcore) ; 253.4K hrs min. MIL-HDBK-217F (25℃) |
||||||||
| DIMENSION |
220*62*31mm (L*W*H) |
||||||||
| PACKING |
0.68 kg;16 pcs/11.88 kg/0.63CUFT |
||||||||
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance :includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. The ambient temperature derating of 3.5℃/1000m is needed for operating altitude greater than 2000m(6500ft) 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies. 7. R type efficiency slightly less than the Blank type, according to the actual measurement. 8. Inrush current parameter has 10% tolerance . 9. RCM is on voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1. |
|||||||||
Features
• Slim and Low profile (31mm)
• Fanless design,350W convection
• Withstand 300VAC surge input for 5 seconds
• Built-in active PFC function
• -30~+70℃ working temperature
• Protections: Short circuit / Overload / Over voltage /Over temperature
• DC OK active signal and redundant function(option)
• Operating altitude up to 5000 meter (Note.5)
• LED indicator for power on
Block Diagram
Derating Curve
STATIC CHARACTERISTIC
Function Manual
1.DC_OK Signal
DC_OK is a collector shorted signal. It is used by an optocoupler in the power supply which indicates the output status of the power supply as exhibited below.
2.Redundant function
(1) UHP-350R is built-in redundant function and can be connected 2 units in parallel .
(2) When in parallel operation the maximum load should not be greater than the rated power of any PSU.
Mechanical Specification
Installation
1.Operate with additional aluminum plate
In orderto meet the"Derating Curve"and the"Static characteristics" UHP-350 seres must beinstalled onto an aluminum platelor the cabinetofthe same sizeon the bottom.The size ofthe suggested aluminum plate is shown as below.And foroptimizing thermal performance,the aluminum plate must have an even andsmooth surface (or coated with thermal grease), and UHP-350 series must be firmly mounted at the center of the aluminum plate.
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved.
Sitemap | Blog | Xml | Privacy Policy 
