1.Electro-optical conversion efficiency≥40%
2.Excellent beam quality,High power stability
3.Altitude Stress-resisting Capacity
4.Power continuously adjustable and fast switch response
5.High modulation frequency and editable waveform
(Support door to door service)
Product Origin:
ChinaLead Time:
10DaysShipping Port:
QingdaoLaser power:
1000wLaser source:
RaycusDimension:
440x586x149mm1000W Raycus Single Module CW Fiber Laser Source RFL-C1000S-CE
Widely used in bathroom industry, glasses industry, hardwareindustry , automobile industry. Automobile industry, medicalindustry, electronic industry, home furnishing, Kitchenware andbathroom.And gradually replace the traditional welding methods.
Feature :
1.Electro-optical conversion efficiency≥40%
2.Excellent beam quality,High power stability
3.Altitude Stress-resisting Capacity
4.Power continuously adjustable and fast switch response
5.High modulation frequency and editable waveform
Specifications
Optical Properties |
|
- Average Output Power(W): 1000 | - Central Wavelength(NM): 1080±5 |
- Maximum Modulation Frequency(kHz): 5 |
- Output Power Instability: ±1.5% |
- Red Guide Laser Power(mW): 0.1~1 |
- Output Power Tunability(%): 10~100 |
Output Characteristics |
|
- Output Connector: QBH(Customizable) |
- Output FiberCore Diameter (um): 25(Customizable) |
- Beam Quality(M2):<1.8 |
- Half Angle Divergence (rad): ≤0.08 |
Electronic Control Characteristics |
|
- Power Supply: 220±10%VAC 50/60Hz |
- Max.Power Consumption(W): 4500 |
- Control Mode: RS-232/AD/Ethernet |
|
Other Characteristics |
|
-Dimensions (mm): 440x586x149 |
-Weight (kg): <25 |
-Cooling Method: Water Cooling-Working | Temperature(°C): 10-40 |
Dimension
1. Alarm Laser fault indicator.
2. Laser Laser output indicator.
3. Power Power Indicator, indicates that the power is switched on when the LED illumines
4. Water Pipe Joint Quick connector, insert the quick-plug water pipe with an outer diameterof 12 into the quick insert connector for cooling the circulating cooling water
5. lnterface Laser external control interface.
6. RS232 232 serial interface for communication between laser and host computer.
7. ETHERNET Ethernet interface for communication between laser and upper computer.
8. Power Rocker switch for turning on the laser's main power.
9. 220V Input 220V power line input
Wiring diagram in RS-232 mode
Wiring in AD Mode
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy