Reci upgrades and brings CO2 glass laser tube to its generation 3.0.
The third generation of laser tube cancels the adjusting screws at both tube ends. Instead, the metal parts are made by high precision CNC machine.
New firing technology is used to join metal parts and glass parts together directly.
This new technology makes the stability in W series laser tubes extremely high.
русский
español
العربية
(Support door to door service)
Order(MOQ):
1Product Origin:
ChinaShipping Port:
QingdaoCO₂ Laser Tube – W Series
Product Characteristics:
01 Beam quality: >95% TEM00 mode
02 Optical resonator advantage: enhance power
03 Advanced radioactive materials coated lenses
04 Alternative technique: metal-glass sintering
Product Description
Product Category: CO₂ Laser Tube
Description: Reci upgrades and brings CO₂ glass laser tube to 3.0 generation. Through the last ten years of development, the CO₂ glass laser tube now develops to the third generation. The third generation of laser tube cancels the adjusting screws at both tube ends. Instead, the metal parts are made by high-precise CNC machine. New firing technology is used to join metal parts and glass parts together directly. This new technology makes the high stability in W series laser tubes.
Product Parameters
| Model | W1 |
W2 |
W4 |
W6 |
W8 |
T1 |
T2 |
T4 |
T6 |
| Rated Output Power(W) | 75 | 90 |
100 |
130 | 150 | 140 | 150 | 160 | 180 |
| Max Output Power(W) |
90 |
100 |
130 | 170 | 180 | 170 | 180 | 180 | 200 |
| Length(mm) |
1100 |
1250 |
1450 |
1650 |
1850 |
1100 | 1250 |
1450 |
1650 |
| Diameter(mm) |
Φ80 |
||||||||
| Catalyst | Yes |
||||||||
| Warranty Period(days) | 540 |
360 |
540 |
360 |
|||||
Operating Conditions
T Series & W Series
• The lnstructions of Extended Threaded-tube for Output Lens Protection
Note:
The extended threaded-tube is recommended when Multi-layer plywood,pVC materials are to cut. lt should be installed to avoid the gas inside leakingcaused by glue expansion, in the circumstance that the temperature of lasertube heads are increasing due to dust around the working environment.Installation method:
Unscrew he original threaded-tube, and blow off the dust on the lens withthe balloon.Then install the extended threaded-tube.The length can be re-served according to the actual requirement with the pliers cutting fromV-groove position.
Operating Conditions
T Series & W Series
1. Water cooling requirements: the cooling liquid is pure water, the flow rate is2-5L/min, and the water temperature is 10-50℃.
2.Environmental requirements: temperature 2-40°℃, humidity 10%-60%
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved.
Sitemap | Blog | Xml | Privacy Policy 
