ZRSUNS 100W Laser Power Supply adopts high frequency design, top quality lC parts for major partsto ensure high performance and lifetime.100 W laser power supplies can be used to 100W - 130W CO2laser tube for kinds of industrial laser cutting system, very good compatible and high cost performance.
(Support door to door service)
Order(MOQ):
1Product Origin:
ChinaShipping Port:
Qingdao100W ZR Co2 Laser Power Supply
ZRSUNS 100W Laser Power Supply adopts high frequency design, top quality lC parts for major partsto ensure high performance and lifetime.100 W laser power supplies can be used to 100W - 130W CO2laser tube for kinds of industrial laser cutting system, very good compatible and high cost performance.
Product Feature
1)Stable performance:
Each power supply have been much more rigorous testing procedures, under full load high temperature (52~55 degrees celsius) 24 hours of aging, to ensure the stability of each power supply;
2)Good compatibility:
Can adapt to a number of manufacturers 100W sealed off CO2 laser tube, but also has strong adaptability and fast response, engraving, cutting benefits good effect.;
3)Control is simple:
Select high or low level control, the use of TTL-level control of the laser can start and stop. At the same time increase the protection switch, testing is through the external water and ventilation.Laser power control is simple, you can use 0 ~ 5V analog signal control the size of the laser power, you can also use the PWM (pulse width modulation) signal to be controlled.;
4)Protection function:
Power supply itself has open circuit protection, a good grounding in the case of protection, the power supply to short-term work in the open state, so to avoid the laser tube burst due to the damage caused by laser power supply, thereby enhancing the laser power supply of life.;
4)Special Features: (optional addition):
Power users do not need to open the shell, you can simply determine the laser power is working to distinguish between the failure of laser tube or power supply failure.
Specifications
Model | 100W |
|
Input |
Input Voltage | AC220V士10%(Need AC110v products, ordering need indicate) |
AC frequency |
47-440HZ |
|
Cold-state Surge Current |
≤60A(AC220V input) ≤30A(AC110V input) |
|
Leakage current |
≤0.7mA(AC220V input)≤0.4mA(AC110V input) |
|
Output | Maximum output voltage |
DC40KV |
Maximum output current |
DC31mA(depending on the laser tubes of different manufacturers) |
|
Efficiency |
≥90%( Full load) |
|
Response speed | s1ms |
|
Control lnterface | TIL multilevel switching control, effective level can be high and low selection (see control wiring diagram) |
|
Insulation | Input--output |
AC1500V 1 minutes s10 mA |
lnput--shell |
AC1500V 1 minutes s10 mA |
|
Output--shell |
Connection |
|
Insulation Resistance |
≥50MQ(DC500V) |
|
Environmental Requested |
Working temperature |
-10℃- 50℃ |
Storage of temperature |
-20℃ - 75℃ |
|
Relative Humidity |
Maximum 85% RH (non-condensing) |
|
Altitude |
100,000 feet of work 200,000 feet of storage, does not work |
|
Cooling methods |
Forced air cooling (fan cooling) |
|
Dimensions (L*W*H) |
285mm*190mm*95mm |
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy