The new generation of Single Module 2000W-3000W Fiber Lasers which combined with high power, compact size, superior beam quality, and high light conversion efficiency. It can meet the requirements of precision processing, 3C product welding and high-reflective material cutting ability are significantly improved. It is suitable for remote processing, high-frequency laser cutting and clean surface cutting. It can be quickly and conveniently integrated into machine tool equipment and large-scale factory automation production line.
(Support door to door service)
Product Origin:
ChinaLead Time:
10DaysShipping Port:
QingdaoLaser power:
2000w 3000wLaser source:
MAXSize:
482.6×950×193 mmMAX MFSC-2000W Single-mode Continuous Fiber Laser Source
MFSC 2000W single-mode continuous fiber laser, with modular design, optical module integrated fully enclosed design, protection level reaches IP67 level. The system is highly integrated, free of maintenance, and highly reliable. The laser power is continuously adjustable, with high beam quality and high laser stability. It is an ideal laser source for laser fine cutting, precision welding, thick plate cutting and other applications. Using optical fiber with QBH head output, it can cooperate with laser processing head, galvanometer, etc. for system integration with robots and machine tools. It is widely used in 3C, hardware, medical, automotive, aviation and other fields.
Specifications
Optical Characteristics |
Test Conditions |
Min. |
Typical |
Max. |
unit |
Output mfsC-1200W |
100% continuous |
1200 |
W |
||
Output mfsC-1300W |
100% continuous |
1300 |
W |
||
Output mfsC-1500W |
100% continuous |
1500 |
W |
||
Power Range |
10 |
100 |
% | ||
Center Wavelength |
100% continuous |
1070 |
1080 |
1090 |
nm |
Spectral Bandwidth (3dB) |
100% continuous |
3 | 5 | nm |
|
Short-term Power Stability |
100% continuous h>1 |
±1 | ±1.5 |
% |
|
Long time Power Stability |
Continuous 24 h>100% |
±2 |
±3 |
% |
|
Beam Quality ㎡ |
100% continuous (20U-QBH) |
±1.3 |
μs |
||
100% continuous (50U-QBH) |
2.8 | μs |
|||
Laser on time |
10%-90% of output | 50 | 80 | KHZ |
|
Laser off time |
90%-10%6 of output | 30 | 50 | μw |
|
Modulation frequency |
100% of the output | 20 | 50 | m |
|
Indicated red power |
100% of the output | 150 |
μm |
||
Length of fiber optic cable |
15 | mm |
|||
Output fiber core diameter |
50 (30,100 optional) |
μm |
|||
Bending radius of fiber optic cable |
200 |
mm |
|||
Output way |
Standard QBH (LOC) |
||||
Working voltage |
180 |
220 | 240 | VAC | |
The rated power MFSC-1200W |
100% of the output | 4.8 | KW |
||
The rated power MFSC-1300W |
100% of the output | 5.2 | KW |
||
The rated power MFSC-1500W |
100% of the output | 6 | KW | ||
Operating environment temperature |
10 | 40 | ℃ |
||
Relative humidity ofworking environment |
10 | 85 | % | ||
Cooling way |
Water cooled |
||||
Storage temperature |
-10 | 60 | ℃ | ||
The whole machine size |
800 x482.6 x192.9 |
MM |
Description
• Front Panel Description
ITEMS |
FUNCTION DESCRIPTION |
(OFF ON) Key Switch |
Power switch of laser |
(Emergency stop)Emergency Stop Switch |
Emergency stop |
(Start) Start Switch |
Start laser(on-off signal of hardware) |
ALARM |
Abnormal situation light of laser |
ACTIVE |
Normal situation light of laser |
POWER |
Power light of laser |
• Back Panel Description
ITEMS |
FUNCTION DESCRIPTION |
CTRL |
External control connector |
RS232 |
RS232 connector |
AC220 |
220VAC power input |
POWER |
Leakage protection switch |
WATER OUT |
Water cooling output port |
WATER IN |
Water cooling input port |
Operation Guide
IMPORTANT:
Do not reuse a lint-free optical wipe or swab.
Do not touch the protective lens of the fber connector.
Do not blow directly, or else new dirty will be brought.
Do not touch the tip of the cleaning swab with your fingers and use each swab only once.
Cleaning is necessary before place the protective cover and sleeve.
Never blow air directly at the surface, because you could imbed contaminants intothe surface. Always blow across the surface !
If the fber connector could not be installed in optical system immediately, pleasecover it with the protective cap cleaned with compressed air.
Operation Guide
6mm Carbon Steel Fne Cutting 4mm304 stainless steel fine cutting 4mm304 stainless steel fine cutting
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy