Low and medium power open-loop laser control system.
(Support door to door service)
Order(MOQ):
1Lead Time:
10DaysShipping Port:
QingdaoFSCUT1000S Fiber Laser Cutting Control System
1.Low and medium power open-loop laser control system;
2.Support 2-stage piercing technique;
3.Come with simple layout to improve plate utilization;
4.Trajectory accuracy 0.05mm,position accuracy 0.01mm;
5.Support Fly-cut, frog-leap, auto-focus adjustment and dual-shuttlefunctions.
Technical Data:
Motion Control |
Motor Control Signal |
3 servo axis ports with high frequency pulse output of 2MHz,1 servo axis with analog output |
3servo axis ports with encoder feedback channel, quadruple frequency can reach to 8MHz | ||
Positive & negative limit and servo alarm signal input for each axis | ||
Servo enable function | ||
Motion ControlPerformance |
Control cycle 1ms | |
S-type acceleration and deceleration |
||
Velocity look-ahead strategy,intelligent speed control at turning point |
||
Local curvature analysis and speed limitation at small curves | ||
Smoothing process at small graphics | ||
Laser Control Signal | 1 PWM signal, DlP switch 24V and 5V for option | |
2 DA 0-10V analog signal | ||
l/O0 Terminal Board |
6 general inputs |
|
8 general relay outputs |
||
Work Environment |
Temperature:0-60C |
|
Humidity:5%-95%(no condensation) |
||
Power Supply |
24V DC/2A |
|
Software |
Cypone |
System Connection Diagram
BMC1603 card uses PCl interface. Dimension: 213mm*112mm.
Motion control card BMC1603 connected with lO terminal board BCL4562 by a C62-2cable.
Industrial Park Weiji Town,Xuzhou City,Jiangsu Province, China
Copyright © 2024 Anhui Codos Laser Technology Development Co., Ltd. All Rights Reserved. Sitemap | Blog | Xml | Privacy Policy